Red Light Therapy Panels for a Gym or Studio: Buyer Guide
Share
For a gym, studio or clinic, the right red light therapy panel setup comes down to five practical questions: how members will use the space (standing or lying down), how much power and wall space you have, how many sessions you expect per hour, how you will keep shared surfaces clean, and whether the warranty applies to commercial use. A single full body panel on a wall is often the simplest start, and you can add stations as demand grows.
This guide is for business buyers planning an amenity and is not medical advice. Red light devices are sold for general relaxation and wellness, so keep your member-facing language to that. Anyone with a health condition, or who is pregnant, should check with their doctor first.
The short answer: pick a format around how members will use the room
The format drives almost everything else, from floor space to cleaning. There are three practical choices for a business: a full body panel for a standing station, a free-standing professional panel you can move, and a mat or bag for a lie-down room. Our red light therapy panels and full body red light therapy collections show what we carry, and all red light therapy products are in one place.
Which format fits which space? (comparison table)
| Format | Fits | Think about |
|---|---|---|
| Full body panel (for example the iReliev 1500W or iReliev 2400W) | A standing station in a recovery corner or studio room | Mounting options listed on the product page, an outlet nearby, standing room in front |
| Professional panel (for example the Lumara PRO) | Clinics and studios that want a professional-grade unit | Check the product page for what is included, power draw and availability |
| Multi-wavelength panel (for example the P1 panel) | A room for flexible use | Confirm wavelengths and specs on the product page |
| Mat or bag (for example FullGlow 180 or FullGlow 360) | A quiet lie-down room | Cleaning the surface between members, storage when not in use |
Specs, availability and warranty terms differ by product and are shown on each product page; we pass through each supplier's terms as written. For a deeper comparison of mount styles, see stand vs door mount vs wall mount.
How much space and power will you need?
Measure the standing room in front of the panel and the walkway to it, then add the distance the manual recommends between the user and the device. Keep that clear zone free of equipment and bags. For power, read the product page and the manual for the plug type and draw, then count how many devices will share a circuit. A single panel is usually simple, but several in one room can add up, so have an electrician review the circuit. Our articles on red light panel electricity use and panel specs explained help you read the numbers, and the U.S. Department of Energy offers general guidance on estimating electricity use.
How many stations does a studio need?
Think in sessions per hour, not square feet. As an example only: if a session runs 10 minutes and you allow 5 minutes for changeover, one station handles about four sessions an hour. If you expect eight members in the busiest hour, that points to two stations. Use your own session length from the manufacturer guidance for the device you choose. Start with one station, watch real demand for a few weeks, and add another once a queue forms. Our red light dosage calculator and panel size guide help you plan.
What do business buyers need to ask about warranty and use?
Home warranties and commercial warranties are not always the same. Before you buy, ask the supplier in writing whether the warranty covers use in a business, how many hours of use it assumes, who handles service, and what is excluded. Do not assume. Ask also about replacement parts and the shipping method, since freight terms differ by supplier. Our warranty and support page explains how we pass supplier terms through, and your insurer can tell you whether a new amenity changes your coverage.
Keeping a shared device clean and safe
- Cleaning: Use only cleaners the manufacturer approves, and wipe handles, mats and any touched surfaces between members.
- Eyewear: Follow the manufacturer guidance on protective eyewear and provide it if recommended.
- Signage: Post simple instructions and the manufacturer's distance guidance near the station.
- Member screening: A short note asking members with health conditions or who are pregnant to check with their doctor is reasonable.
- Language: The FDA general wellness policy describes low risk products intended for general wellness; keep marketing to wellness and relaxation and avoid disease or treatment claims.
Who this is not for
If you are a clinic that needs a specific cleared medical device for a particular use, a general wellness panel is not a substitute; confirm the device's regulatory status with the supplier and your counsel. If you are an individual buying for home, start with the red light therapy buying guide and what size panel you need. If you are adding a full recovery room, compare red light with other equipment in our infrared sauna vs red light therapy guide.
Gym and studio buying checklist
- Decide whether members will stand or lie down, and choose the format.
- Measure the wall, door or floor space plus the clear zone in front.
- Read the power draw and plug type, and review the circuit if you add more than one.
- Ask in writing whether the warranty covers commercial use and who handles service.
- Write a cleaning routine and gather approved cleaners and towels.
- Plan eyewear and posted instructions per the manufacturer.
- Write wellness-only language for your menu and website.
- Start with one station, then add more based on real demand.
Frequently Asked Questions
What should a gym look for in a red light therapy panel?
Start with the format (wall, door or free-standing panel, or a mat), the power and circuit it needs, the physical footprint, and the written warranty. Ask the supplier in writing whether the warranty applies to commercial use before you buy.
Is a full body panel or a mat better for a studio?
A full body panel suits a dedicated station where members stand. A mat or bag suits a lie-down room. Choose by how members will use the space, then check each product page for what it includes.
How many panels does a small studio need?
It depends on member volume and session length, not on a fixed rule. Estimate sessions per hour, then size stations to match. Start with one and add more once you see real use.
Do I need a special circuit for a gym red light setup?
Check the product page and manual for power draw and plug type. Several panels in one room can add up, so have an electrician review the circuit if you plan more than one.
How do you keep a shared panel hygienic?
Wipe touched surfaces such as handles and mats with a cleaner the manufacturer approves, provide fresh towels, and give protective eyewear if the manufacturer recommends it. Follow the cleaning section of the manual.
Can we tell members that red light therapy treats a condition?
No. Keep your language to general relaxation and wellness. Do not promise medical results, and suggest that members with health conditions or who are pregnant check with their doctor first.
Outfitting a gym or studio? Our B2B Program for studios gives you one contact and a written quote within 1 business day.
Written by Logan McClure, founder of Restore Suite. Every guide is researched using peer-reviewed studies, recognized medical sources, and manufacturer specifications. This article is educational and is not medical advice. Learn about our editorial standards or contact our team.
Outfitting a gym, studio, clinic or team? iCoolsport makes multi-person cold plunge pools and commercial chillers, and Penguin Chillers offers commercial water chillers. Contact us for a written quote on multi-unit orders.
Want to try red light therapy at home? NovaaLab pads and wraps, like the flexible Novaa Light Pad, cover a targeted area, and our red light therapy collection also includes panels and full-body options. All ship free.
