Penguin Chillers Cold Therapy Chiller, 7,500 BTU Cold Plunge Chiller with Built-In Pump

The Penguin Chillers Cold Therapy Chiller is built for cold plunging. It keeps your tub cold without ice runs, with 7,500 BTU/hr of cooling, a built-in pump and quick-connect camlock fittings. Set your temperature and the plunge is ready when you are, from 37°F up to 100°F.

Add the Install & Filter Kit to connect it to most tubs: a washable, reusable 150-micron filter, two 6 ft lengths of 3/4 in black vinyl tubing, two bulkheads with hose clamps, and two barbed elbow fittings. The kit bulkheads fit tub walls 1/4 in thick or less.

Already have a tub? This is the chiller Penguin recommends for an existing tub. It connects with 3/4 in tubing to tubs that have chiller ports, and some tubs need a simple thread adapter. Tell us which tub you have and we will confirm the fittings before your order ships.

Features

• 7,500 BTU/hr cooling capacity
• Built-in pump and 3/4 in quick-connect camlocks
• Cools water to as low as 37°F
• Outdoor rated for air temperatures above 32°F
• Runs on a standard 110 to 120V outlet (3.9A, 450W)
• Optional Install & Filter Kit with washable 150-micron filter

Specifications

Specifications from Penguin Chillers. Dimensions and weights are approximate.

Setup notes from Penguin

• Place it where water and condensation will not cause damage.
• The pump is not self-priming: set the chiller within 3 ft of the tub drain, with its base level with or lower than the bottom of the tub.
• Do not use a filter rated below 50 microns, and do not use an ozone venturi.
• Sun, air temperature and tub insulation affect how cold the water stays.
• For home use; Penguin sells separate commercial models.

Penguin Chillers designs and builds its chillers in Knoxville, Tennessee, and is a member of the Made in Tennessee program.

Warranty and delivery

• 1-year Penguin Chillers warranty included. Extended 2- or 3-year coverage is available where shown as an option. Penguin's warranty applies only to units bought from an authorized dealer, which Restore Suite is.
• Ships from Knoxville, Tennessee. Manufacturer lead time: 2 to 3 business days.
• Shipping cost is shown at checkout before you pay.
• Questions about sizing or setup? Contact us and we will help.

Free shipping from Knoxville, Tennessee, to the 48 contiguous U.S. states. Most chillers ship within 2 to 5 business days (see the product description for this model's lead time), and tracking is emailed when it ships.

Full shipping policy

Chillers and accessories arrive by parcel carrier. Complete plunges may need help to move into place, so check the weight on the Specifications tab. Inspect the box when it arrives, note any damage, and tell us within 48 hours so we can resolve it for you; damaged or defective units are repaired or replaced.

Before setup, read the setup notes in the description: chiller placement relative to the tub drain matters for proper operation.

1-year Penguin Chillers manufacturer warranty included; 2- and 3-year extended coverage available where offered.

1-year Penguin Chillers warranty from the ship date, with optional 2- or 3-year extended coverage where offered. If you pair a Penguin chiller with a tub as a set, a photo of the finished setup may be needed to validate warranty coverage, and we will walk you through it. Restore Suite is your first contact for any question.

Returns: request a return within 21 days of delivery; every return needs pre-approval. Approved returns carry a 20% restocking fee, and you pay return shipping. Custom units cannot be returned.

How warranty support works